Categories

My Cart

Your Shopping Cart is Empty

Manufacturers

Signalink SL-MOD-13K
Click to enlarge
Price: $7.95
Product ID : SIGSLMOD13K
Manufacturer: Signalink
Milwaukee: In stock
Orlando: In stock
Cleveland: In stock
Las Vegas: In stock
E-mail to a friend | Add To Wish List

Purchase

Item Description

Jumper Module for Signalink Units - Kenwood 13 Pin Accessory Port

Detailed Description

"Plug & Play" jumper modules plug into the SignaLink in place of the jumper wires that you would normally use to configure the unit for your radio.  This greatly simplifies installation and completely eliminates the possibility of installing the jumper wires incorrectly.  Swapping radios is also easier, as you simply unplug one module and plug in another.  All  jumper modules are compatible with the SignaLink USB.

This jumper module is compatible with virtually Kenwood radios using the 13 pin accessory port.

NOTE:  This module works with the SignaLink USB only.  It is physically too tall to fit inside the older SignaLink SL-1+ model "as is", although some customers have trimmed the PTT jumper leads to make it fit.

There are three different PTT configurations used by Kenwood. Make sure to use the correct setting. 

Setting #1 - This configuration is the most common and works with early Kenwood radios such as the TS-140, TS-450S, TS-870 and TS-950. Some newer radios such as the TS-570D, TS-590S, and TS-2000/X also use this setting.

Setting #2 - This configuration is less common and is used by some newer radios (TS-690 for example), and some older radios such as the TS-440.

Setting #3 - This configuration works with the TS-940 only.       

Product Reviews

Login or Register to write the first review.

Products You May Like