Milwaukee: 800-558-0411 | Cleveland: 800-321-3594 | Las Vegas: 800-634-6227 | Orlando: 800-327-1917



1000W HF/6M Automatic Tuner

Milwaukee: In Stock
Orlando: In Stock
Cleveland: In Stock
Las Vegas: In Stock
SKU: LDGAT1000PROII Category: Tags: ,

The new AT-1000ProII keeps many of the same features of the previous model, but simplifies the operation. With the two position antenna switch there are 2,000 memories that store tuning parameters for near instantaneous memory recall whenever you transmit on or near a frequency you've used before. Just key and it tunes! It will operate at any power level between 5 and 1,000 watts peak RF input. Power rating on HF is 1000W SSB, 750W CW and 500W Digital. On 6M it is 250W on any mode. It has a large, easy to read bargraph with two selectable scale ranges (100 and 1,000 watts) as well as SWR meter. It will interface with many popular transceivers, enabling their TUNE button to control the AT-1000ProII's operation. Dedicated control buttons allow you to fine-tune capacitance and inductance on those rare occasions when the AT-1000ProII can't find a perfect match by itself. It will tune from 1.8 to 54.0 MHz continuously, and will match an amazing range of antennas, from Yagis and dipoles to inverted-Vs and slopers; virtually any coax-fed antenna from 6 to 1000 ohms impedance (16 – 150 ohms on 6 meters). Tuning time is usually under 10 seconds. If you're transmitting near a frequency with stored tuning parameters, it will set those parameters in under 0.2 seconds. Longwires or antennas fed with ladder line require an external balun. Dim: 10″w x 3″h x 11″d; 5 lbs.

Weight 5.55 lbs
Dimensions 15 x 10.25 x 4 in


There are no reviews yet.

Be the first to review “LDG AT-1000PROII”